Fish Oil, Cow Manure Combine to Produce Biogas
DENMARK - By-products from the production of omega-3 fish oil in combination with cattle manure can be gainfully used to produce biogas.
2 May 2012
2 minute read
What do fish and cows have to do with each other? Not much, normally, but the by-products of their production can contribute to producing sustainable energy in the form of biogas. The potential of using by-products from fish oil production in combination with cattle manure in a biogas plant has been tested by scientists at Aarhus University and the results are promising.
"Using by-products from the omega-3 production process for biogas production shows great potential, especially with regard to soapstock," says postdoc Alastair Ward from Aarhus University and head of the research project. Soapstock and bleaching earth are rich in oils and fats which have a high biogas potential.
Fish processing is an important industry in Norway. Refining of fish oil to produce omega-3 oil for human consumption produces several by-products, two of which are soapstock and bleaching earth. It is estimated that the production of omega-3 oils results in 20,000 tons of soapstock and 30,000 tons of bleaching earth annually. These by-products are rich in oil but are currently not used.
At the same time, biogas production is underdeveloped in Norway due to low energy costs and small farm sizes, which reduce the profitability of this otherwise effective method of treating organic wastes and reducing greenhouse gas emissions from agriculture.
"If fish soapstock and bleaching earth can be used as co-substrates with cattle manure, it could increase the profitability of small biogas plants," says Alastair Ward.
The findings of the project show that both bleaching earth and soapstock have good methane yields. There are, however, practical limitations. Combining soapstock with cattle manure, while increasing methane yields, can potentially overload the process and subsequently inhibit the microbial processes if too much soapstock is added. In addition, it was found that the pH of soapstock varies greatly, so it is advisable to measure the pH before adding the soapstock to the substrate.
Addition of bleaching earth increases methane yields to a somewhat lesser degree than addition of soapstock. Addition of large quantities of bleaching earth can stress pumping and mixing equipment due to its high dry matter content and abrasive nature.
What are soapstock and bleaching earth?
Soapstock is produced when free fatty acids are removed from crude edible oils with alkali in the oil refining process. The fatty acids settle to the bottom as alkali soaps – the so-called soapstock.
Bleaching earth is an adsorbent clay that removes colour, traces of heavy metals and other impurities from oils.
Read the report “Biogas potential of soapstock and bleaching earth, DCA report no. 4, January 2012” here.
